Scallop Shell E Polymer Clay Cutters
From ฿115
Syncing production calendar...
🔥 Buy More, Save Automatically
Buy 3+Save 5%
Buy 5+Save 10%
Buy 10+Save 15%
Our Scallop shell shape E is available in 2 small sizes and is part of our Aquatic range of clay cutters. Scallop Shape D is a similar shape that is available in larger sizes.
Clay Cutter Details
- Cutting Edge is 0.4mm, leaving clean cuts that require minimal sanding.
- Sizes listed are in mm and are measured from the inside edges of the cutters and represent the finished size of your clay pieces.
- Clay Cutters with Inner line imprints are 1.5mm-2mm below cutting edge.
- All our clay cutters are designed with a sturdy thick base for extra strength and comfort.
- Clay cutter color may vary depending on material availability. (Usually Beige)
- Our clay cutters are a 3D Printed product made from PLA, a bioplastic made by from plants such as corn, cassava and sugarcane.
How to Use
- Make sure your conditioned clay is rolled firmly on to your work surface.
- Lightly dip the cutting edge of your clay cutter into corn starch.
- Press the clay cutter firmly on to your clay then gently pull it back up.
- For best results repeat from step 2 for additional cuts.
*Corn starch is used to stop clay sticking to the sides of your clay cutter, water can also be used for this.
Cutter Care
- Wipe clean with soapy water.
- Don’t place cutters near the oven or store in direct sunlight. Excessive heat may cause warping.
Size chart
